Veilige betaling
Via iDeal, bankoverschrijving
of pinnen/contant bij ophalen
Grote voorraad
Ook apparatuur uit
het hoge segment
100% verzekerd
Dubbel verpakt en
verzekerd per PostNL

CW KEYER™ is a powerful USB CW interface/memory keyer based on the K1EL chip and microKEYER™

Lees meer..

Beschikbaarheid: Op voorraad. Nog 1 exemplaar beschikbaar.

€ 138,00

CW KEYER™ is a powerful USB CW interface/memory keyer based on the K1EL chip and microKEYER™


CW KEYER™ provides the unmatched CW features of the original microKEYER™ and a USB radio control interface in a small, readily portable package for those with no need for the audio handling capabilities of microKEYER™.


CW KEYER™ uses a single USB port can be interfaced with many logging programs for both radio control and CW transmission. CW KEYER™ supports a PS/2 keyboard CW generation or control of the memory keyer functions (including contest serial number generation) or a PS/2 keypad for control of the memory functions.  The keyboard and keypad function whether CW KEYER™ is connected to a computer on not.


No COM or LPT port necessary, just one USB port


Complete "Computer <-> Radio" electrical isolation
- optical isolation of ALL signals -> Radio Control, CW, PTT


Compatible with most standard MS Windows based logging or control software
- special microHAM "USB Device Router" program creates virtual COM ports as needed for full functionality with your favorite programs
- customizable presets to instantly change CW KEYER parameters for the various requirements of different programs


Integrated computer control port for all radios CI-V, FIF-232, IF-232, RS-232
- fully supported Icom, Kenwood, Ten Tec, Yaesu and other radios
- no separate level converter required


Integrated superior K1EL WinKey™ chip with extended capabilities for superior CW
- front panel speed knob
- nine (9) user programmable memories
- PS/2 keyboard/keypad support for direct CW sending
- PS/2 keyboard/keypad support for instant CW message playback and function handling
- PS/2 keyboard/keypad CW works without computer connection
- precisely timed auto PTT
- selectable side tone
- all parameters are stored inside the CW KEYER memory and reloaded after power up


Strong RFI immunity
- integrated chokes and filters for best RFI immunity
- advanced shielding and circuit design for RFI product suppression


Quick change connectors
- USB, Radio CAT - 1/8"
- Paddle - 1/4", PS/2 - MiniDIN6, CW - RCA, PTT - RCA


Front panel LEDs for easy visual feedback of CW and PTT


Metal/Aluminum case, powder coated and silk screened


Free, time unlimited firmware/software upgrades via Internet


KABELLIJST (Dienen er los bij besteld te worden):

DB15-EL-K3: Elecraft K3

DB15-IC-8: Icom IC-707, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738, IC-746, IC-746Pro, IC-7400, IC-756, IC-756Pro (I+II+III), IC-761, IC-765, IC-775, IC-7600, IC-7700, IC-7800, IC-781, IC-910

DB15-IC-13: Icom IC-703, IC-706, IC-706mkII, IC-706mkIIG, IC-718, IC-7000, IC-7100, IC-7200, IC-7410, IC-9100

DB15-IC-7800: Icom IC-7800

DB15-TS-6: Kenwood TS-140, TS-440, TS-450, TS-680, TS-690,TS-711, TS-790, TS-811, TS-850, TS-940, TS-950, TS-140, TS-680(requires Kenwood IF-10C), TS-711, TS-811 ( requires Kenwood IF-10A), TS-940 (requires Kenwood IF-10B)

DB15-TS-9: Kenwood TS-570, TS-590S, TS-870, TS-2000

DB15-TS-990: Kenwood TS-990S

DB15-TSMINI6: Kenwood TS-480HX, TS-480SAT

DB15-FTMINI8: Yaesu FT-100, FT-817, FT-857, FT-897

DB15-FT-450: Yaesu FT-450

DB15-FT-736: Yaesu FT-736

DB15-FT-840: Yaesu FT-840

DB15-FT-847: Yaesu FT-847

DB15-FT-890: Yaesu FT-890, FT-900

DB15-FT-920: Yaesu FT-920

DB15-FT950: Yaesu FT-950, FTDX-1200, FTDX-3000

DB15-FT-9000: Yaesu FTDX-9000 serie

DB15-FT-1000M: Yaesu FT-1000MP, FT-1000MP MkV, FT-1000MP MkV Field, FT-2000, FT-2000D, FTDX-5000, FTDX-5000D, FTDX-5000MP

DB15-FT-1000D: Yaesu FT-1000D(requires ROM Version 6.0+)


USB: USB 2.0 Full speed , USB 1.1 compatible
 
Power consumption: USB side - up to 100mA
Transceiver side up to 100mA at 13.8V (max. 16V)
 
Radio Port: RXD, TXD max. 57600Bd
- levels: TTL, inverted TTL, open collector bus, RS232
 
CW: open collector, max 30V/400mA
 
PTT: open collector, max 30V/400mA
 
Dimensions: W 103mm (4.05") x H 44mm (1.73") x D 85mm (3.35")
 
Weight: 600g (1.3lbs)
 
 
Requirements:
 
Minimal - PC with Win98SE, 48MB RAM, CD-ROM, USB1.1 port, Transceiver, logger or control software (any)
 
Recommended - PC with WinXP or higher, 256MB RAM, CD-ROM, USB2.0 port, Transceiver with computer port, CW paddle, PS/2 keypad, logger or control software (any)
 
Also suported - Apple G4 or later and OS-X 10.0 or later with MacLoggerDX from DogParkSoftware, Ltd.
Nativelly supported by cocoaModem

Note - Windows Millennium Edition Windows ME is not supported

Schrijf uw eigen review
  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Ons
Product