Veilige betaling
Via iDeal, bankoverschrijving
of pinnen/contant bij ophalen
Grote voorraad
Ook apparatuur uit
het hoge segment
100% verzekerd
Dubbel verpakt en
verzekerd per PostNL

SMΩRF™ is the most powerful and accurate, in-line RF Vector Signal Meter to date with accuracy rivaling professional instruments. Has tons of features, and very high level of user customization to fit every hamshack, every operator's needs. SMΩRF™ connects to the power RF signal by remote sensor, available in several models for power levels up to 12KW and frequencies from 1.8MHz up to 500MHz. The SMΩRF™ can simultaneously measure two independent signals from any two sensors and shows measurement results on its front panel or computer.

Lees meer..

Beschikbaarheid: Niet op voorraad. Backorder mogelijk.

Normale prijs: € 966,00

Nu

Special Price € 759,00

SMΩRF™ is the most powerful and accurate, in-line RF Vector Signal Meter to date with accuracy rivaling professional instruments. Has tons of features, and very high level of user customization to fit every hamshack, every operator's needs.

SMΩRF™ connects to the power RF signal by remote sensor, available in several models for power levels up to 12KW and frequencies from 1.8MHz up to 500MHz. The SMΩRF™ can simultaneously measure two independent signals from any two sensors and shows measurement results on its front panel or computer.

HF + 6m sensors are provided in three models and VHF/UHF sensors are provided in two models:

HF-3KW Sensor
3KW
1.8MHz - 54MHz
3000W ICAS, 1500W CCS
Connectors: SO-239 female, N female (optional)

HF-6KW Sensor
6KW
1.8MHz - 54MHz
Maximal Power: 6000W ICAS, 4000W CCS
Connectors: 7/16 DIN female

 

HF-12KW Sensor
12KW
1.8MHz - 30MHz
Maximal Power: 12000W ICAS, 8000W CCS
Connectors: 7/16 DIN female

 

VHF-2KW Sensor
2KW VHF/UHF
70MHz - 500MHz
Maximal Power: 2000W ICAS, 1000W CCS
Connectors: N female

VHF-6KW Sensor
6KW
70MHz - 500MHz
6000W ICAS, 4000W CCS
Connectors: 7/16 DIN female

Vector measurements are provided with all sensors.

SMΩRF™ is not only desktop meter but Internet enabled device too. Using native IEEE 802.3 Ethernet port provides all measurement results directly to your remote computer, tablet or phone over LAN or the Internet. Does not require local computer. For remote connectivity provides free, open TCP protocol based, high speed Remote Control application for the Windows and OS-X, as well as internal HTTP and VNC server for maintenance access from the web browser and VNC viewer (Windows, OS-X, Linux, Android, iOS).

Every SMΩRF™ meter, every Sensor, and every Sensor Cable connecting the sensor is individually calibrated on regularly calibrated laboratory instruments (ISO/IEC17025, NIST traceable) using specialized, temperature and computer controlled setup in our lab. The SMΩRF™ and the Sensor keep calibration data in their memory and every Sensor Cable is provided with the unique Calibration Certificate containing calibration table. 
SMΩRF™ measures frequency and automatically applies all these calibration data in real-time to provide measurements with ultimate accuracy. Changing or adding new Sensor does not require any factory or user recalibration. In addition, the SMΩRF™ provides simple, built-in calibration process for custom sensor cables if supplied cables are not long enough for user's application, without any requirement for external metering equipment. You are always at the best accuracy.



Main features:
• Operating frequency from 1.8 – 500MHz.
• Signed phase metering up to 500MHz.
• Two points of measurement, at the sensor point and at the antenna point. 
• Phase measurement between sensors.*
• Real time temperature compensation in the meter and the sensor.
• Every meter and every sensor individually calibrated for the best accuracy. Temperature controlled, computer automatized calibration setup makes over 10,000 calibration points in each meter and over 100 points in each sensor. Calibrated per port for level, frequency, phase, and temperature.
• Dual, high speed, three color, user adjustable auto-ranging LED bar graphs with configurable peak hold.
• Very wide viewing angle, sunlight readable, high contrast graphics OLED display.
• Multiple, user configurable display screens for powers, impedances, waveform, spectrum, IMD ... 
• Single and Dual channel modes, auto mode for SO2R, special 4IN direct input mode.
• User configurable alarms (SWR, High Power, Low Power, PSK IMD, Arcing) in three stages (Warning, Alarm, Fault) for two power levels on per sensor, per band basis.

Connectivity:
• Internet enabled, native IEEE 802.3 Ethernet port for remote connectivity, no computer required.
• Internal HTTP server for seamless access from the computer browser for status checking, maintenance and firmware updates. No drivers, no specialized software installation.
• Internal VNC server for remote access to complete setup.
• Dedicated TCP port for high speed remote control applications, open protocol. 
• Free Remote Control application provided for Windows and OS-X.
• Legacy RS232 port.
• High purity, DDS based test signal generator (single/dual tone, noise) for linearity and bandwidth tests.
• Two keying, configurable ports (2x IN, 2x OUT) for protections.
• iLINK port for simplified connectivity to our interfaces.
• Auxiliary port for future expansions (wall mount 7 segment LED displays, analog meter).

Other features:
• Internal speaker for audible warnings.
• Internet synchronized real time clock.
• Ambient light sensor for led bars and display brightness control.
• Fully EMI shielded, aluminum die cast enclosure.

Internal processing highlights:
• 210 MIPS, 32bit floating point Cortex M4 DSP processor for extremely fast updates and accurate calculation of complex functions.• Hi-grade, parallel 16bit ADC, sampled at 125ksps.
• 24bit DAC at 160ksps for signal generator.

* Both sensors are of the same type (U/I or FWD/REF), connected by the same length leads and operating at the same frequency.

Schrijf uw eigen review
  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Ons
Product