Veilige betaling
Via iDeal, bankoverschrijving
of pinnen/contant bij ophalen
Grote voorraad
Ook apparatuur uit
het hoge segment
100% verzekerd
Dubbel verpakt en
verzekerd per PostNL
LDG AT-600 PRO-2

The AT-600ProII will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz.

Lees meer..

Beschikbaarheid: Niet op voorraad. Backorder mogelijk.

Normale prijs: € 409,00


Special Price € 399,00

Time was, 100 watts was a lot of power. Today, more and more mid-sized amps with 500 watts output are becoming popular. The LDG AT-600ProII is designed for this new generation of power levels.

The AT-600ProII will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz. It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-600ProII with longwires, random wires and antennas fed with ladder line just by adding a balun.

The AT-600ProII features two antenna ports with a front-panel indicator showing which is in use, and separate memory banks for each antenna. The optional M-600 4.5" analog meter shows FWD (100 and 600W scales), REV, or SWR in Peak or Average. Easy to read LED bar-graph meters showing RF power, SWR and tuner status, tactile feedback control buttons and an LED bypass indicator complete the user interface. Any power source from 11 – 16 volts DC can be used; the AT-600ProII only draws up to 750mA.


•   600 Watts SSB and CW, 250 watts on 6M. 250 watts PSK and digital.
•   Easy to read LED bar graph display for RF power, SWR and status.
•   Optional M-600 4.5 inch analog meter.
•   4,000 memories for instantaneous band changing.
•   Two position antenna switch with memories for each position.
•   Tuning time: 0.5 to 6 seconds full tune, 0.1 second memory tune.
•   Built in frequency counter for memory operation.
•   Frequency coverage: 1.8 to 54.0 MHz.
•   Tunes 6 to 800 ohm loads (16 to 150 ohms on 6M).
•   For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna.
•   Includes DC power cable.
•   Power requirements: 11 to 16 volts DC at 750 mA max during tuning. WM1012-760 and 1953663 are compatible power supplies.
•   Enclosure: 10.5D x 8.5W x 2.5H inches.
•   Weight: 3 pounds.
•   In the box: Tuner, manual, powercable 12v, (no coax cable).


Snelle en goede service
Review door Eric PC1EMR
Ons Ons
Product Product
Gisteravond weer goed ontvangen door Marcus, bedankt voor de snelle en goede service at600 pro 2 werkt prima. 73 pc1emr
Schrijf uw eigen review
  1 ster 2 sterren 3 sterren 4 sterren 5 sterren