Veilige betaling
Via iDeal, bankoverschrijving
of pinnen/contant bij ophalen
Grote voorraad
Ook apparatuur uit
het hoge segment
100% verzekerd
Dubbel verpakt en
verzekerd per PostNL
EAntenna 70LFA3

EAntenna 70LFA3

Lees meer..

Beschikbaarheid: Niet op voorraad. Backorder mogelijk.

€ 115,00

EAntenna 70LFA3

Let op: Het komt soms voor dat je zelf even wat moet doen aan de antenne. Bijvoorbeeld dat er net een gaatje te weinig of te klein is geboord of dat de handleiding net niet helemaal overeenkomt. Houdt hier dus rekening mee!

EAntenna LFA antennas for 70 MHz represent the largest development in antennas with moderate boom length for a single performance.  This performance is characterized in that:  You can listen to very low signals without noise QRM and QRN alter audio clarity.  Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines.  The bandwidth covers the entire band with low SWR / SWR.  The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.  Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.  The gain is comparable with other models of antennas always larger in dimensions.  All this is explained because in EAntenna:  Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.  It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, by skilled and prepared for a final product of extreme quality.  All hardware we use is in stainless steel AISI 304  The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.  Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C)

Features of the 70LFA3  
This antenna is designed for people who have limited space and want to get good results in this band.  An extra wide lobe makes this antenna ideal for ES in summer, because if you are in Spain and aim the antenna at the center of Europe, you'll have coverage throughout the continent without having to rotate.  Simple and quick, because the boom joints are very easy to assemble. And the elements are attached by clamps Without End (Hose Clamp) for fast installation and durable fastening. this Antenna has a very solid construction, and a very acceptable weight.  Available for enfasar 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.  


70LFA3  30x2mm square boom.
Elements complete, ready to mount 13mm diameter and is 10mm LOOP.
Mast plate 100x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast. 
Frequency Range:    70.0 ~ 70.5 MHz  
Gain:    8.66 dBi  F / B:    22.44 dB  
SWR:    1:1.1 ~ 1:1.2  
Impedance:    50 Ohm  Maximum Power:    5 kW.  
Boom length:    1.45 m / 4.75 '  
Turning radius:    1,0 / 3,3  
Wind Resistance:    ≥ 200kmh / 120mph ≥  
Weight:    4.0 kg / 6.6 lbs
* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd
** Ratio Gain Front / Back "F / B" (gain when the antenna is rotated 180 ° azimuth direction)


Er zijn geen specificaties beschikbaar op dit moment

Er zijn geen downloads beschikbaar op dit moment.

Schrijf uw eigen review
  1 ster 2 sterren 3 sterren 4 sterren 5 sterren